News
Home > News > Content
Sand Mold Casting
- Jul 24, 2018 -

Sand mold casting is a widely used form of casting. As the name suggests, it is made of sand. Sand mold casting requires placing the finished part model in the sand. The mold is then filled with sand at the end of the model week to form the mold. If the mold must be taken out before casting the metal, the mold should be made into two or more parts. The mold must be modified to have holes for casting metal into the mold. The mold is kept in place until the metal solidifies. After taking out the parts, the mold was destroyed, so new molds had to be made for each casting piece. The sand mold factory can cast large parts. Sand mold can be used in iron casting, bronze casting, brass casting and aluminum casting. Wet casting is another sand mold casting process. It is cheap and can produce parts of various sizes.